Products
|
Descriptions
|
Packaging
|
Typical Applications
|
Rust Prevent
|
Water based Rust transformer and metal primer
|
Us. Gallon
|
Use on rusted steel surfaces only
|
Chem-kote 78
|
2 components Epoxy primer for metal and steel coating
|
5 kg.
|
All type of metals and steel coating
|
Chem-kote 90
|
2 components 90% solid high gloss epoxy
- Easy to use, water resistance, chemical and abrasion resistance
|
4 kg., 20 kg.
|
Concrete floor coating
|
Chem-kote 100
|
2 components 100% solid and solvent free epoxy
- Easy to use, water resistance, chemical and high abrasion resistance, Non flammable
|
4 kg., 20 kg
|
Concrete floor coating
|
Chem-kote 8000
|
2 components Clear Epoxy with high solids for Metal & Steel, Galvanized Steel coating
- Easy to use, water resistance, dust free
|
4 kg. , 20 kg
|
Pipes , Steel Structures coating
|
Bauer Evercote308
|
2 components 100% solid and solvent free epoxy
For high chemical protection. Non flammable
- Easy to use, water resistance, Abrasion resistance, Anti rust and Anti corrosive against salt water. Can be applied to damp surface and in humid conditions.
|
5 kg., 10 kg |
Cooling Pipes coating., Steel structures coating., Pumps coating, Concrete floor coating
Waste water treatment tanks
|
Bauer Concast
|
2 components epoxy putty mortar for repair to metal and concrete damaged area. This products can be applied to damp surface and in humid conditions.
- high strength, non shrink epoxy, Concast is very good chemical resistance to normal organic and inorganic acids.
|
6.8 kg
|
Tanks, Pipes, Blowers repairing
|
Resin
( for FRP Lining )
|
Bisphenol Type Vinyl ester resin ESTAR H6650HEX.,
Bisphenol Type unsaturated polyester resin ESTAR R2110 . Those resin are formulated for corrosion resistance to most fuels, vapors, and both acidic and chemicals. It is also heat resistant and blended for toughness. These qualities make it perfect for repairing tank linings, Pipe coatings, as well as fabricating tough all-around parts. Shelf Life Limited to 3 months – 6 months.
|
20 kg
|
For high chemical protection such as Pipe coating or tank lining
|
Hardener
(for FRP Lining )
|
Hardener is required with all Polyester Resins and Vinyl Ester Resin. It is required in different concentrations as defined for each resin product. Each resin product is available as a kit with the correct amount of hardener.
|
|
|
Chopped Strand Mat
E-Glass 300
E-Glass 450
|
Chopped Strand Mat, a random fiber reinforcement designed for use with polyester and vinyl ester resin systems. Uses a styrene monomer soluble binder to hold strands in place, not compatible with epoxy resin systems. Use as basic laminate reinforcement and for gel coat backup to minimize weave print through and pin air bubbles. Chopped Strand Mat is available in a variety of weights and widths to suit a wide range of applications.
|
|
Reinforcing for improved strength and impact resistance
|
CFM-85, CFM-88
|
Acrylic Flexible Membrane for waterproofing
|
20 kg, 25 kg
|
Concrete Wall & Roof Decks, Metal Roof Decks,
|
PU-M99
|
Polyurethane one part Flexible Member for waterproofing Elongation up to 500%
|
20 kg
|
Concrete Wall & Roof Decks, Metal Roof Decks, Gutters
|
Fiber Glass cloth
|
Use together with waterproof products ( CFM-85,
CRM-88 and PU-M99 for reinforcement.
|
|
Reinforcing for improved strength and impact resistance
|
Special Ceramic coating Insulation
|
The highest grade ceramic thermal coating & superior acrylic liquid insulation that will reduce the heat build-up in your home & factory with 93+% solar reflectance which will reduce the load of air conditioning by dramatically
|
20 kg
|
Metal Sheet Roof coating
|
Cold Galvanizing coating |
High-performance coating of 95% pure zinc that electrochemically bonds with ferrous metals to form a galvanic cell. It actively fights rust and corrosion. Use as a touch-up for damaged galvanized coatings. Dries quickly |
|
|
350 g./ can
10 kg / Pail
|
Pipe coating for heat resistance up to +400°c
|
